#Fusion 360 courses in boston software#
3ds Max and Maya are both 3D animation software used in film visual effects and game development. Īutodesk's Media and Entertainment division creates software for visual effects, color grading, and editing as well as animation, game development, and design visualization. The company's Revit line of software for building information modeling is designed to let users explore the planning, construction, and management of a building virtually before it is built. The manufacturing industry uses Autodesk's digital prototyping software-including Autodesk Inventor, Fusion 360, and the Autodesk Product Design Suite-to visualize, simulate, and analyze real-world performance using a digital model in the design process. Īutodesk became best known for AutoCAD, but now develops a broad range of software for design, engineering, and entertainment-and a line of software for consumers. Autodesk software has been used in many fields, and on projects from the One World Trade Center to Tesla electric cars. AutoCAD, which is the company's flagship computer-aided design (CAD) software and Revit software are primarily used by architects, engineers, and structural designers to design, draft, and model buildings and other structures. The company was founded in 1982 by John Walker, who was a coauthor of the first versions of AutoCAD. Its Canada offices are located in the provinces of Ontario, Quebec, and Alberta. offices are located in the states of California, Oregon, Colorado, Texas, Michigan, New Hampshire and Massachusetts. Autodesk is headquartered in San Francisco, California, and has offices worldwide. is an American multinational software corporation that makes software products and services for the architecture, engineering, construction, manufacturing, media, education, and entertainment industries. Some solder leaked out from the edges, which I think is actually ideal in terms of filling gaps.Autodesk, Inc. Once in and hot, I used pliers to squeeze them into the bottom of the pockets.
After the pockets were fully covered, I heated the coin again and placed in the copper bits.
#Fusion 360 courses in boston full#
This was in hopes of getting full contact adhesion. I heated this and melted the solder to cover the whole bottom of the pockets first before placing the copper bits in at all. In order to get the best adhesion I could, I started by applying flux and a small amount of solder in each of the four pockets in the brass.
I think I got the flux way too hot while trying to take photos and solder at the same time, but it still worked. This one is certainly no exception, and soldering is the ugly phase. I shamelessly copied this project and learned a ton in the process.Īnyway, back to the dog coin thing. I also recommend the video from Adam where he makes a brass watering can.
Highly recomend Stay-Brite solder and Stay-Clean flux. It's more expensive than the plumbing solder I was using before, but holly crap does it work better. He recommended some specific solder and flux, so I tried it out. A couple months ago I was practicing copper and brass soldering for fun and watched a video by Adam Savage for inspiration. My advice for tape fixturing is go slow, get really strong tape, and don't use coolant. On the first attempt, I used mist coolant, but that piece failed when the coolant dissolved the adhesive on my double stick tape. Using a 3/32 end mill at 6 in/min I was able to cut out the pockets and the contour of the dog face. The brass was slightly over sized, so I was able to use the offset edges to keep the work parallel in the vice.
I cleaned a scrap piece of 1/2 inch aluminum plate and the brass stock with acetone and then stuck the two together. I'd heard of using super glue for fixturing, and figured that a good double stick tape could work just as well. Both of those methods work, but for this project I wanted to try something new. In the past I've either left tabs or left a thin layer of material all the way around and filed it off by hand. Additionally, for this part, I wanted to cut a contour all the way around the piece. First off if you put it in a vice and clamp too hard it's likely to bend. I've learned the hard way that fixturing thin material can be a pain in the butt. The bulk of the coin is made from some brass 1/8 inch thick stock I had in the shop from an old project.
0 kommentar(er)
